Design & Reuse
Catalog of SIP Cores
System on Chip design resources
945 IP
851
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Aubrey-ref-1.62-3.63-0.55-2.5.02_TSMC_55_uLPeF is an ultra-low quiescent LDO (Linear regulator) in TSMC 55uLPeF....
852
0.0
Low-Dropout Linear Regulator (LDO)
Ultra-low quiescent LDO voltage regulator in TSMC 22ULL...
853
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Aubrey-OV-ref-1.62-3.63-0.5-1.8.06_GF_22_FDX is a Linear regulator in GF 22FDX with ultra low quiescent current for retention applications....
854
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Aubrey-ref-1.62-3.63-0.55-2.5.02_TSMC_55_uLPeF is an ultra-low quiescent LDO (Linear regulator) in TSMC 55uLPeF....
855
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Della-cl-ref-1.8-5.5-0.9-1.4.02_SF_65_LFR6LP is an ultra-low quiescent Capacitor-Less LDO in SF 65LF6LP....
856
0.0
Low-Dropout Linear Regulator (LDO)
iLR-Victoria-OV-ref-1.9-5.5-0.5-3.3.05_GF_22_FDX is a Low-dropout LDO linear regulator in GF 22FDX to supply logic islands....
857
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Aubrey-ref-1.62-3.63-0.55-2.5.02_TSMC_55_uLP is an ultra-low quiescent LDO (Linear regulator) in TSMC 55uLP....
858
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Aubrey-1.9-4.4-1.2-3.3.01_TSMC_180_eLL is a Low quiescent LDO (Linear regulator) in TSMC 180eLL....
859
0.0
Low-Dropout Linear Regulator (LDO)
nLR-Charny-ref-5V-2.0-5.5-1.8-5.0.03_TSMC_180_G is a Linear Regulator in TSMC 180G, Low Noise optimized for sensitive application such as RF or PLL bl...
860
0.0
Low-Dropout Linear Regulator (LDO)
qLR-Aubrey-ref-1.62-3.63-0.55-2.5.01_TSMC_55_uLP is an ultra-low quiescent LDO (Linear regulator) in TSMC 55uLP....
861
0.0
Low-Noise Bandgap Reference - Low Noise: 63nV/√Hz, PSRR: -80dB TSMC 0.18μm CMOS (CLM18)
This macro-cell is a low noise, high PSRR voltage reference core designed for TSMC 0.18μm (CLM18) CMOS technology. The core is ideal for applications ...
862
0.0
Low-noise Regulator for VCO 1V to 0.8V
Noise @ 1MHz offset=2.5nV/Sqrt(Hz), IDD=12mA...
863
0.0
Low-Power Bandgap Reference - Low Integrated Noise (62.5µVrms) in TSMC 40nm
This macro-cell is a low power voltage reference generator core designed for TSMC 40nm CRN40LP CMOS technology. The core is ideal as a general purpose...
864
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source, reference current sources and reference frequency generator. Bandgap source fo...
865
0.0
Power Management Unit
PMU is designed to supply integrated circuits with stable and precise voltage. 055UMC_PMU_01 is a library including RS block and 4 LDOs: LDO1 to suppl...
866
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source and reference current sources. Bandgap source forms temperature, power supply a...
867
0.0
Power Management Unit
250iHP_PMU_05 is power management system, which consists of two parts – Bandgap and 4 LDOs. Bandgap reference voltage source forms temperature and pow...
868
0.0
Power Management Unit
250iHP_PMU_03 is power management system, which divided in primary unit and up to three secondary units. Primary unit includes bandgap reference volta...
869
0.0
Power management unit
PMU is designed to supply embedded integrated circuits with stable and precise voltage and 1%-accurate clock frequency. It integrates 4 LDOs and 3 osc...
870
0.0
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
028TSMC_LDO_01 is a Power management unit, designed to supply integrated circuits with stable and precise voltage. IP includes Bandgap block, and 3 LD...
871
0.0
Power Management Unit (1.1 - 1.4V output voltage, load current 5 mA)
055TSMC_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit Status). The block has configurable output voltage (1.1/1.2/1.3...
872
0.0
Power management unit (1.2 V output voltage, 945 nA output current)
065TSMC_PMU_01 is designed to supply embedded integrated circuits with stable and precise internal voltage and currents. It integrates power switch el...
873
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 150mA)
130iHP_PMU_02 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
874
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
875
0.0
Power On Reset
POR-1.8-5.5-0.9-1.4.01_SF_65_LFR6LP is a Power-On-Reset in SF 65LFR6LP. It is used to monitor AVD and VDD supplies and to generate information to the...
876
0.0
Power on Reset
The power on reset consists of a Schmitt trigger and simple logic for forced reset input, whish is forced asynchronous reset. Output port is setRe, th...
877
0.0
Power on Reset
065TSMC_PoR_02 is a Power-on-Reset (PoR) circuit provides a reset signal to the chip when supply voltage reach required level. The block generates res...
878
0.0
Power On Reset (POR)
HCLTech offers IP POR hcl_por_t40_v1 circuit provides a reset signal to the chip when supply ramps up so that the chip always starts in a known state...
879
0.0
Power On Reset (POR)
...
880
0.0
Power On Reset / Brown Out Reset
POR-BOR-LS-T22ULL-1.62-3.63-0.55-3.3-02_TSMC_22_ULL is a combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL....
881
0.0
Power On Reset / Brown Out Reset
POR-BOR-AON.01_TSMC_55_LP is a combined Power-On-Reset (POR) and Brown-out Reset (BOR) in TSMC 55LP dedicated to Always-on domains....
882
0.0
Power On Reset / Brown Out Reset
POR-BOR-1.62-3.63-0.55-3.3.02_TSMC_40_uLPeF is a combined Power On Reset and Brown Out Reset in TSMC 40uLPeF....
883
0.0
Power On Reset / Brown Out Reset
POR-BOR-1.62-3.63-0.55-3.3.04_TSMC_22_ULL is a combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL....
884
0.0
Power On Reset / Brown Out Reset
POR-BOR-VR-LS-1.44-1.98-0.6-1.8-A02-D1.8-T22ULL_TSMC_22_ULL1.8 is a Power-On-Reset and Brown-Out-Reset in TSMC 22ULL with programmable detection thesh...
885
0.0
Power On Reset / Brown Out Reset
POR-BOR-LS-T22ULL-1.62-3.63-0.55-3.3-02r_TSMC_22_ULL is a combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL with reset signal filtering....
886
0.0
Power On Reset / Brown Out Reset
POR-BOR-LS-DUAL-T22ULL-1.62-3.63-0.55-3.3-02r_TSMC_22_ULL is a combination of a DUAL Power-On-Reset and Brown-Out-Reset in TSMC 22ULL with reset signa...
887
0.0
Power On Reset / Brown Out Reset
POR-BOR-1.44-1.98-0.6-1.8.02_GF_22_FDXPlus is a Power-On-Reset and Brown-Out-Reset in GF 22FDXPlus with programmable detection thesholds....
888
0.0
Power On Reset / Brown Out Reset
POR-BOR-1.62-3.63-0.55-3.3.04-T22ULLDNW_TSMC_22_ULL is a combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL....
889
0.0
Power On Reset / Brown Out Reset
POR-BOR-5V-[2.7-5.5]-[0.8-5.0].02_TSMC_152_G is a combined Power-On-Reset and Brown-Out-Reset in TSMC 152G....
890
0.0
Power On Reset / Brown Out Reset
POR-BOR-1.62-3.63-0.55-3.3.02_TSMC_40_LP is a combined Power On Reset and Brown Out Reset in TSMC 40LP....
891
0.0
Power on Reset 1.2V
055SMIC_POR_04 provides a reset signal to the chip when supply voltage reach required level. POR generates reset signal depending of the level supply ...
892
0.0
Power On Reset Circuit
The designated IP is a power on reset circuit intended for integration into 130nm CMOS technology System on Chips. RESET threshold value is determined...
893
0.0
POWER ON RESET FOR 1.8V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
894
0.0
POWER ON RESET FOR 3.3V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
895
0.0
POWER ON RESET FOR 5V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
896
0.0
POWER ON RESET FOR DUAL SUPPLY SYSTEMS
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
897
0.0
Power on Reset IP, Input: 1.2V, UMC 0.13um HS/FSG process
Vrr=0.8V Vfr=0.65V, VCC=1.2V, Ivcc=12.7uA, HS process with B-type IO., Power On Reset, UMC 0.13um HS/FSG Logic process....
898
0.0
Power on Reset with detector
The block consists of voltage detector, power on reset and NOR3 gate. The voltage detector is a comparator that compares input voltage with reference...
899
0.0
Power-on Reset
IP 250iHP_PoR_01 is power-on reset unit which produces a reset signal after rising supply voltage to produce the initial state of the triggers. The bl...
900
0.0
Power-On Reset - Flexible Threshold (1­-1.3V), Ultra Low Current (100nA) Silterra 0.18 μm
This macro-cell is an ultra low consumption Power-On Reset (POR) core designed for SilTerra 0.18µm CL180G CMOS technology. The threshold sensing volta...